MBi Posted January 22, 2021 Share Posted January 22, 2021 Hello, It is possible to change the MTU to 9000 on the AppLayering appliance ? Thanks in advance. Link to comment
0 MBi Posted January 27, 2021 Author Share Posted January 27, 2021 Okay, i did it. Now I will test and see.. ip link show | grep mtu # to show the value Edit the file vi /etc/sysconfig/network-scripts/ifcfg-eth0 Add at the end : MTU=9000 save and reboot 1 Link to comment
0 Raymond Colon Posted January 22, 2021 Share Posted January 22, 2021 Yes, but read on. We have not tested altering the MTU, thus do not know the impact on your environment. Should you make the change, it is at your own risk. If you encounter issues, the failed task(s) should be tested with the default value, before opening a support case. Link to comment
0 Victor Homocea1709159382 Posted January 22, 2021 Share Posted January 22, 2021 I think I played with this some years back but I don't remember if I encountered issues or not. Theoretically it should work fine but in the end... you need to test :) Link to comment
0 MBi Posted January 27, 2021 Author Share Posted January 27, 2021 Hello, thank you. Do you know how to change it on the appliance ? The network is ready to support jumbo frame. Link to comment
Question
MBi
Hello,
It is possible to change the MTU to 9000 on the AppLayering appliance ?
Thanks in advance.
Link to comment
4 answers to this question
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now