Hoang Hung Posted June 28, 2019 Share Posted June 28, 2019 Hello guy: I have defaul timing. But indont understand >> TIMER monitoring formula citrix Interval: 5 second >>>>>>>>> WHAT MEAN Response Timeout: 2 ms >>>> WHAT MEAN Retries: 3 >>>>>>>> WHAT MEAN > How long waiting citrix the service to be marked down ?. Thanks all Link to comment Share on other sites More sharing options...
Gregor Blaj Posted June 28, 2019 Share Posted June 28, 2019 - Interval defines how often the appliance will probe (check) the back end service, under normal operations. - Response Timeout defines how long to wait before marking a probe as failed. - Retries define how many times the appliance will retry connecting to the back end service which had a probe fail, before marking it as down. By default a service which goes down will be marked as down after ~6-11 seconds, keeping in mind the default Response Timeout is 2 seconds, not 2 ms. Minimum: 3x2 seconds (3 probes x Response Timeout) Maximum: 5 + (3x2) seconds (Interval + (3 probes x Response Timeout)) Link to comment Share on other sites More sharing options...
Hoang Hung Posted June 29, 2019 Author Share Posted June 29, 2019 Thanks you so much ! Link to comment Share on other sites More sharing options...
Hoang Hung Posted June 29, 2019 Author Share Posted June 29, 2019 Hi Warnox Why service will down after 6-11 seconds. When == 6 seconds ? When == 11 seconds? thanks Link to comment Share on other sites More sharing options...
Gregor Blaj Posted June 29, 2019 Share Posted June 29, 2019 Look at the minimum and maximum I wrote in the last post. It depends on where in the ‘cycle’ the service actually goes down. Link to comment Share on other sites More sharing options...
Hoang Hung Posted July 1, 2019 Author Share Posted July 1, 2019 Hi Warnox And now, I must change : After >= 30s >> server down and then How do you do ? I think that " - Interval 5s - Respone = 10s - Retries =3 What do you think ? Link to comment Share on other sites More sharing options...
Gregor Blaj Posted July 2, 2019 Share Posted July 2, 2019 That won't work because Response can't be longer than Interval (Response < Interval). The following would mark a service as failed between 30-41 seconds. Interval: 11 Response: 10 Retries: 3 Or this for 30-36 seconds. Interval: 6 Response: 5 Retries: 6 Link to comment Share on other sites More sharing options...
Hoang Hung Posted July 3, 2019 Author Share Posted July 3, 2019 Thanks Warnox . Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now