Carsten Peukert Posted February 9, 2015 Share Posted February 9, 2015 I have a running XA/XD 7.6 environment with two controllers installed on Windows 2012R2. The installation has approximatly 90 Citrix Policys administrated from studio. These policys was migrated from a productive XA 6.5 installation. The citrix policys in the XA 7.6 environment for the user sessions works correct. When I launch the Modeling Wizard on the delivery controller it's only show a blank page. I have installed only the studio in a fresh installation of W2K8SR2 and connect it to the delivery controller. There was also a blank page for policy wizard results. I have attached a screenshot from the report of the Policy Modeling Wizard. What can I do ?? Link to comment
0 Thomas Aubugeau1709156074 Posted January 26, 2016 Share Posted January 26, 2016 Same Problem XenApp 6.5 HRP06 on Windows Server 2008 R2 and 2012R2 Domain Controller Modeling Report shows no result !! Link to comment
0 Joe Robinson Posted February 9, 2016 Share Posted February 9, 2016 Upgraded to 7.7, and I'm seeing this issue. Still not fixed, and I haven't seen a public hotfix released yet. Link to comment
0 Mike Engel1709152334 Posted February 12, 2016 Share Posted February 12, 2016 Just upgraded to XenApp 7.7. Issue still exists. If a select a 2012 domain controller results are not returned. Selecting a 2008 R2 domain controller, results are returned. How can this still be an issue? Link to comment
0 Mike Engel1709152334 Posted February 12, 2016 Share Posted February 12, 2016 I stand corrected. I just applied CTX202233 and modeling results now work correctly in XenApp 6.5. I do not see this same patch available for 7.x or higher. Link to comment
0 Richard George1709156061 Posted March 3, 2016 Share Posted March 3, 2016 We have recently upgraded to XenDesktop 7.8 and unfortunately this issue still exists. Link to comment
0 Erkan Sefiloglu Posted March 17, 2016 Share Posted March 17, 2016 Any updates on this please? Knowing what policies are applying is paramount to us resolving policy conflicts / issues! Link to comment
0 Joe Robinson Posted March 17, 2016 Share Posted March 17, 2016 This has been broken for a while. If this is mission critical to you, then I would recommend opening a case with Citrix. The fix was released for 6.5, you may be able to get a private hotfix that resolves it for you. Link to comment
0 Erkan Sefiloglu Posted June 22, 2016 Share Posted June 22, 2016 After talking to Citrix Support, they have told me to upgrade to 7.6 LTSR to fix the issue. I will try this in a few weeks and will report back. Erk Link to comment
0 Martijn Kools Posted August 16, 2016 Share Posted August 16, 2016 After talking to Citrix Support, they have told me to upgrade to 7.6 LTSR to fix the issue. I will try this in a few weeks and will report back. Erk Any results? I´ve tested this on 7.9 and it still doesn´t work. Link to comment
0 Przemyslaw Kicinski1709152101 Posted December 8, 2016 Share Posted December 8, 2016 It seems to be partially fixed in 7.11. I've run some reports in Citrix Studio and it showed everything correctly. However when I run modelling wizard in GPMC I don't see any Citrix settings... Link to comment
0 Vincent Lewin1709156903 Posted April 15, 2019 Share Posted April 15, 2019 I am running 7.6 LTSR and this is still an issue. My domain is 2012 R2 DCs running 2012 functional level so adding a 2008 DC is not an option anymore! Fix maybe citrix? Link to comment
0 Vincent Lewin1709156903 Posted April 15, 2019 Share Posted April 15, 2019 I am running 7.6 LTSR and this is still an issue. My domain is 2012 R2 DCs running 2012 functional level so adding a 2008 DC is not an option anymore! Fix maybe citrix? Link to comment
0 Christian Immke Posted September 27, 2023 Share Posted September 27, 2023 I am running 2303 and it is still not fixed :( Link to comment
Question
Carsten Peukert
I have a running XA/XD 7.6 environment with two controllers installed on Windows 2012R2.
The installation has approximatly 90 Citrix Policys administrated from studio. These policys was
migrated from a productive XA 6.5 installation.
The citrix policys in the XA 7.6 environment for the user sessions works correct.
When I launch the Modeling Wizard on the delivery controller it's only show a blank page.
I have installed only the studio in a fresh installation of W2K8SR2 and connect it to the delivery
controller. There was also a blank page for policy wizard results.
I have attached a screenshot from the report of the Policy Modeling Wizard.
What can I do ??
Link to comment
38 answers to this question
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now