Overview
This document serves as a guide to prepare an IT organization for successfully evaluating Unified Communications (UC) in desktop and application virtualization environments using Microsoft Teams. Over 500,000 organizations, including 91 of the Fortune 100 (as of Mar 2019) use Teams in 44 languages across 181 markets. Without proper consideration and design for optimization, virtual desktop and virtual application users will likely find the Microsoft Teams experience to be subpar. Citrix provides technologies to optimize this experience, to make Teams more responsive with crisp video and audio, even when working remotely in a virtual desktop. However, with multiple combinations of Teams infrastructures, clients, endpoint types, and user locations one must find the right “recipe” to deliver Teams optimally.
The Citrix® HDX™ Optimization for Microsoft® Teams offers clear, crisp 720p high-definition video calls @30 fps, in an optimized architecture. Users can seamlessly participate in audio-video or audio-only calls to and from other Teams users, Optimized Teams’ users and other standards-based video desktop and conference room systems. Support for screen sharing is also available. This document guides administrators in evaluating the Teams delivery solution in their Citrix environment. It contains best practices, tips, and tricks to ensure that the deployment is the most robust.
Optimized versus Generic delivery of Microsoft Teams
This choice is often what causes the most confusion about delivering a Microsoft Teams experience in a Citrix environment. The main reason is that without optimization the media must “hairpin” from your client to the server in the data center and then back to the endpoint. This additional traffic can put significant load on the server (especially for video) and can cause delays and an overall degraded experience, especially if the other party in a Teams call is originating from a user in a similar virtualized experience. This method for delivering a Microsoft Teams experience is referred to as “Generic” delivery.
The preferred method of delivery is the “Optimized” method. In this case, the architect or administrator uses Optimization for Microsoft Teams in their environment. The “Optimized” method is like splitting the Teams client in two, as illustrated in the following comparison diagram. The user interface lives inside the virtual host, and is seen completely in the virtual desktop or application display. However, the media rendering, or media engine is separated off to run on the endpoint. This method allows for an exquisite rendering of the audio and video and a great desktop sharing experience.
Choosing the right Teams optimization for your environment
Optimization for Teams is not a “one size fits all” technology. For the Teams desktop app, with Windows, Linux, Mac, and ChromeOS clients, the Citrix HDX Optimization for Microsoft Teams with Citrix Workspace app is the way to go. For Web based teams, with Windows and Linux clients using a Chrome browser, the Citrix HDX Optimization for Microsoft Teams with Browser Content Redirection would be the right solution. Optimization for mobile OSs is not available right now. Typically, mobile users who desire access to Teams on their devices use Teams native apps from the appropriate app store.
Pros of using Citrix HDX Optimization for Microsoft Teams
- Richest experience, all media rendered on endpoint
- No hair-pinning effect, media communications go point to point between clients and the Teams conferencing service homed in Office 365
- Less resource impact on the Citrix Virtual Apps and Desktops hosts
- Less HDX bandwidth consumed over “generic” approach
- Supports delivery with Citrix Virtual Apps using Windows Server OSs
- Simple installation on client devices, minimal prerequisites
- Can be used remotely from the enterprise network with Office 365
- Support for Windows, Mac, Linux, and ChromeOS endpoints
- Wide choice of supported HDX Premium thin client devices (see Citrix Ready list)
- Support provided by both Microsoft and Citrix support
- No requirement for both the sides of the optimized architecture to authenticate to the back-end
- Requires no modification to the Teams back end
Citrix HDX Optimization for Microsoft Teams
These components are by default bundled into Citrix Workspace app and the Virtual Delivery Agent (VDA)
Conceptual Architecture
Call Flow
-
Launch Microsoft Teams.
-
Teams authenticates to O365. Tenant policies are pushed down to the Teams client, and relevant TURN and signaling channel information is relayed to the app.
-
Teams detects that it is running in a VDA and makes API calls to the Citrix JavaScript API.
-
Citrix JavaScript in Teams opens a secure WebSocket connection to WebSocketService.exe running on the VDA (127.0.0.1:9002). WebSocketService.exe runs as a Local System account on session 0. WebSocketService.exe performs TLS termination and user session mapping, and spawns WebSocketAgent.exe, which now runs inside the user session.
-
WebSocketAgent.exe instantiates a generic virtual channel by calling into the Citrix HDX Browser Redirection Service (CtxSvcHost.exe).
-
Citrix Workspace app’s wfica32.exe (HDX engine) spawns a new process called HdxRtcEngine.exe, which is the new WebRTC engine used for Teams optimization.
-
HdxRtcEngine.exe and Teams.exe have a 2-way virtual channel path and can start processing multimedia requests.
—–User calls——
-
Peer A clicks the call button. Teams.exe communicates with the Teams services in Azure establishing an end-to-end signaling path with Peer B. Teams asks HdxTeams for a series of supported call parameters (codecs, resolutions, and so forth, which is known as a Session Description Protocol (SDP) offer). These call parameters are then relayed using the signaling path to the Teams services in Azure and from there to the other peer.
-
The SDP offer/answer (single-pass negotiation) and the Interactive Connectivity Establishment (ICE) connectivity checks (NAT and Firewall traversal using Session Traversal Utilities for NAT (STUN) bind requests) complete. Then, Secure Real-time Transport Protocol (SRTP) media flows directly between HdxRtcEngine.exe and the other peer (or O365 conference servers if it is a Meeting).
For a detailed list of system requirements, please check the Microsoft Teams article in edocs.
Supported Teams headsets and handsets
The list of devices that are supported by Microsoft for Teams and Skype for Business
Installation Steps
Prerequisites
- Download the latest Citrix Virtual Apps and Desktops VDA installer. On Citrix.com, select the Downloads Tab. Select Citrix Virtual Apps and Desktops as the product and select Product Software as the download type. Select Citrix Virtual Apps and Desktops 1906 or later, it is under Components
- Ensure that the Teams service is reachable from the client in addition to the VDA
- Ensure the latest Microsoft Teams Client version is installed on the Virtual Delivery Agent hosts or base image or on Citrix Virtual Apps servers, which will be used to deliver Microsoft Teams or on both. See instructions on how to install it below
- Download the latest Citrix Workspace app from here.
The installation procedures are simple
Citrix Virtual Apps and Desktops VDA install on the host virtual machines
The HDX Optimization for Teams is bundled as part of VDA in Citrix Virtual Apps and Desktops. It is installed on the host or base image of the catalog and Citrix Virtual Apps servers, which may be used to deliver Teams.
Application requirements
The VDA installer automatically installs the following items, which are available on the Citrix installation media in the Support folders
- Microsoft .NET Framework 4.7.1 or later, if it is not already installed
- Microsoft Visual C++ 2013 and 2015 Runtimes, 32-bit and 64-bit
- BCR_x64.msi - the MSI that contains the Microsoft Teams optimization code and starts automatically from the GUI. If you’re using the command-line interface for the VDA installation, don’t exclude it
For Windows Server, if you did not install and enable the Remote Desktop Services roles, the installer automatically installs and enables those roles.
3 GB of free disk space for each user profile (recommended by Microsoft)
Ensure that the Microsoft Teams client application is installed in per-machine mode on the VDA
Install the Citrix Virtual Delivery Agent on the host or base image, following the instructions here.
Using this image, create the appropriate machine catalogs and delivery groups in the Citrix Studio / Citrix Cloud Manage tab before trying to establish sessions and accessing the Teams client.
Microsoft Teams install
Note: Install Microsoft Teams after the VDA is installed. Teams installer has a detection logic for underlying VDAs, which is critical for optimization.
The installation must be done on the golden image of your catalog or in the office layer (if you are using App Layering). We recommend you follow the Microsoft Teams installation guidelines. Avoid installing Teams under AppData (unless you are using dedicated/assigned virtual desktops). Instead, install in C:\Program Files by using the ALLUSER=1 flag, which is the recommended mode for pooled VDI/Windows Server/Windows 10 multiuser. For more information, see Install Microsoft Teams using MSI
If Teams was installed in user mode before on the image:
- Users from EXE installer:
- Have all users in the environment manually uninstall from Control Panel > Programs & Features
- Admin from MSI:
- Admin uninstalls in the normal way
- All users in the environment must sign in for uninstallation to be completed
- Admin from Office Pro Plus:
- Admin may need to uninstall as if MSI were directly installed (above)
- Office Pro Plus must be configured to not include Teams
Windows client device – Citrix Workspace app for Windows install (latest Current release recommended)
The Citrix Workspace app for Windows has the optimization components built into it. When you install the application on your client, the components are already present.
System Requirements
- Approximately 1.8–2.0 GHz quad core CPU required for 720p HD resolution during a peer-to-peer video conference call. Quad core CPUs with lower speeds (~1.5 GHz) but equipped with Intel Turbo Boost or AMD Turbo Core that can boost up to 2.0 GHz are also supported
- Citrix Workspace app requires a minimum of 600 MB free disk space and 1 GB RAM.
- Microsoft .NET Framework version 4.6.2 or later is installed automatically, if it is not already installed.
Follow the instructions to install the Citrix Workspace app for Windows here.
Policy Settings
To enable optimization, ensure the Microsoft Teams redirection Studio policy is set to Allowed The policy is enabled by default
Note: In addition to this policy being enabled, HDX checks to verify that the version of Citrix Workspace app is equal to or greater than the minimum required version. If both conditions are met, the following registry key is set to 1 on the VDA. The Microsoft Teams application reads the key to load in VDI mode
Key: HKEY_CURRENT_USER\Software\Citrix\HDXMediaStream
Name: MSTeamsRedirSupport
Value: DWORD (1 - on, 0 - off)
Network Requirements
Microsoft Teams relies on Media Processor servers in Microsoft Azure for meetings or multiparty calls. Microsoft Teams relies on Azure Transport Relays for scenarios where two peers in a point-to-point call do not have direct connectivity or where a participant does not have direct connectivity to the Media Processor. Therefore, the network health between the peer and the Office 365 cloud determines the performance of the call.
We recommend evaluating your environment to identify any risks and requirements that can influence your overall cloud voice and video deployment. Use the Prepare your organization’s network for Microsoft Teams page to evaluate if your network is ready for Microsoft Teams.
Port / Firewall settings
Teams traffic flows via Transport Relay on UDP 3478-3481, TCP 443 (fallback), and the clients need access to these address ranges: 13.107.64.0/18, 52.112.0.0/14, 52.120.0.0/14.
Optimized traffic for peer to peer connections is routed on higher ports (1 - 65535 UDP) at random, if they are open. For more info read.
Be sure that all computers running the Workspace app client with Teams optimization can resolve external DNS queries to discover the TURN/STUN services provided by Microsoft 365 (for example, worldaz.turn.teams.microsoft.com
) and that your firewalls are not preventing access.
For support information, see Support section of our documentation.
Summary of key network recommendations for Real Time Protocol (RTP) traffic
Connect to the Office 365 network as directly as possible from the branch office. Bypass proxy servers, network SSL intercept, deep packet inspection devices, and VPN hairpins (use split tunneling if possible) at the branch office. If you must use them, make sure that RTP/UDP Teams traffic is unhindered. Plan and provide enough bandwidth. Check each branch office for network connectivity and quality. The WebRTC media engine in the Workspace app (HdxRtcEngine.exe) uses the Secure RTP protocol for multimedia streams that are offloaded to the client. The following metrics are recommended for guaranteeing a great user experience
- Latency (one way) < 50 milliseconds
- Latency (RTT) < 100 milliseconds
- Packet Loss < 1% during any 15-second interval
- Packet inter-arrival jitter < 30 ms during any 15-second interval
In terms of bandwidth requirements, optimization for Microsoft Teams can use a wide variety of codecs for audio (OPUS/G.722/PCM/G711) and video (H264/VP9). The peers negotiate these codecs during the call establishment process using the Session Description Protocol (SDP) Offer/Answer.
Citrix minimum recommendations for bandwidth and codes for specific type of content are:
- Audio (each way) ~90 kbps using G.722
- Audio (each way) ~60 kbps using Opus*
- Video (each way) ~700 kbps using H264 360p @ 30 fps and 16:9
- Video (each way) ~2500 kbps using H264 720p @ 30 fps and 16:9
- Screen sharing ~300 kbps using H264 1080p @ 15 fps
(*) Opus supports constant and variable bitrate encoding from 6 kbps up to 510 kbps, and it is the preferred codec for Peer to Peer calls between two VDI users
Common deployment related tips and questions
Teams Tips
To update the Teams desktop client, Uninstall the currently installed version, then install the new version.
To uninstall the Teams desktop client MSI, if it was first installed using the per-machine mode, use one of the following commands:
msiexec /passive /x Teams_windows_x64.msi /l*v msi_uninstall_x64.log
msiexec /passive /x Teams_windows.msi /l*v msi_uninstall.log
Troubleshooting
Here are a few ways to resolve the issues users may face:
Symptom: Installation Failure
Cause: Inconsistent state of Citrix redirection services
Resolution: Validate the following:
- Teams automatically launches for all users after sign-in to Windows
- Existence of directories and files
- Program Files (x86) or Program Files
- Microsoft\Teams\current folder with Teams.exe, which is the main application
- Teams Installer folder with Teams.exe, which is an EXE installer (do not ever run this manually!)
- %LOCALAPPDATA%
- Microsoft\Teams is either not there, or mostly empty (only a couple of files)
- Program Files (x86) or Program Files
- Existence of shortcuts:
- Teams desktop client shortcut, pointing to Program Files…, in the following places:
- On desktop
- In the Start menu
- Teams desktop client shortcut, pointing to Program Files…, in the following places:
- Existence of Windows Registry information:
- A value named Teams, of type REG_SZ, in one of the following key paths in the registry:
- Computer\HKEY_LOCAL_MACHINE\SOFTWARE\WOW6432Node\Microsoft\Windows\CurrentVersion\Run
- Computer\HKEY_LOCAL_MACHINE\Microsoft\Windows\CurrentVersion\Run
- A value named Teams, of type REG_SZ, in one of the following key paths in the registry:
Symptom: Failure while placing an audio/video call and cannot find the audio/video devices connected
Cause: Inconsistent state of Citrix redirection services
Resolution: Validate that the HdxRtcEngine.exe process is running on the client machine. If the process is not running then we need to restart Citrix Redirection Services, do the following - in this order - to check if HdxRtcEngine.exe is getting launched
- Exit Teams on VDA
- Start services.msc on VDA
- Stop "Citrix HDX Teams Redirection Service"
- Disconnect the HDX session
- Reconnect to the HDX session
- Start "Citrix HDX Teams Redirection Service"
- Restart "Citrix HDX HTML5 Video Redirection Service"
- Launch Teams on VDA
Symptom: No incoming ring notification tone on a Citrix Session
Cause: Audio being played on the VDA host
Resolution: No audio devices on Citrix session / incorrect local default audio device
- Make sure that a remote audio device is present on the Citrix session.
- Make sure that the Citrix Redirection service is running on a remote host. Restart it (solves most problems).
- In case multiple audio sources are available, make sure that the default playback device on the client machine is selected to the device where the user expects to hear the ring notification.
Summary
We support Microsoft Teams infrastructures: whether on-prem or Office 365 (cloud) as long as configuration allows for successful internal and external client communication.
We have walked through the way to go about evaluating the Citrix Optimization for Teams and pointed you to the resources for deploying the rest. The Optimization for Microsoft Teams greatly increases server scalability and offers zero degradation in audio-video quality and optimal network bandwidth efficiency. It is the Microsoft recommended solution for a VDI deployment.
There are no comments to display.
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now