Sasi Tzdaka
-
Posts
30 -
Joined
-
Last visited
Content Type
Forums
Articles
Labs
Videos
TechZone
Citrix Community Articles
Events
Profiles
Posts posted by Sasi Tzdaka
-
-
On 6/14/2023 at 4:27 PM, Amin Harbawi said:
Did you check the Process list on the linux shell, are there multiple processes utilizing the same ports on the management IP (443,80,22)?
how to check it?
-
Hi
we try this command to deploy the remote pc on computers but nothing happend
VDAWorkstationCoreSetup_2203_3000.exe /quiet /remotepc /controllers "xdc01.corp.local xdc02.corp.local" /enable_hdx_ports /enable_remote_assistance /noresume /noreboot
-
10 hours ago, Carl Stalhood1709151912 said:
Are these physical appliances? Do both appliances have the same VLAN configuration on their switch ports?
yes they mpx and the vlan is configure same on the switches
-
Hi
I have the error - "cannot complete your request"
We have 2 adc with HA
when we fail over to the secondery the gateway work fine
When we fail over again we get cannot complete yoir request
-
HI
every day we need to reboot the VPX couple times because Cannot access management GUI or SSH
-
Hi
we want to change the display language
how we do it?
-
Hello,
How do I make a connection using the DOMAIN user through the secondary NS
For some reason it doesn't work only through the secondary.
Through the main NS everything is fine -
Hi,
We want to deploy HTML5
we use Enable-vdassl -enable --CertificateThumbPrint “<thumbprint>”and use this commands :
Get-BrokerAccessPolicyRule –DesktopGroupName ‘GROUPNAME’ | Set-BrokerAccessPolicyRule –HdxSslEnabled $trueSet-BrokerSite –DnsResolutionEnabled $true
when we connect from the storefront everything work fine
when we connecting from the Netscale we got this error:
when we chnge the –HdxSslEnabled to False we can connect from the Netscaler but the HTML5 from the storefront not working
We use wildcard certificate and we check the port 443 tcp from SNIP to the vda is open
-
Hi,
We want to deploy HTML5
we use Enable-vdassl -enable --CertificateThumbPrint “<thumbprint>”and use this commands :
Get-BrokerAccessPolicyRule –DesktopGroupName ‘GROUPNAME’ | Set-BrokerAccessPolicyRule –HdxSslEnabled $trueSet-BrokerSite –DnsResolutionEnabled $true
when we connect from the storefront everything work fine
when we connecting from the Netscale we got this error:
when we chnge the –HdxSslEnabled to False we can connect from the Netscaler but the HTML5 from the storefront not working
We use wildcard certificate and we check the port 443 tcp from SNIP to the vda is open
-
On 1/17/2023 at 10:32 AM, Sjoerd Van den Nieuwenhof said:
Hi,
Did is worked before or is this a new setup?
Are users get a certificate?
Did you specify the FAS server with the GPO? https://docs.citrix.com/en-us/federated-authentication-service/install-configure.html#configure-group-policy
I need some more info to help you.
new setup
We get a certificatethe fas server is in the GPO apply on VDA/SF/FAS
-
new setup
We get a certificatethe fas server is in the GPO apply on VDA/SF/FAS
-
HI
we have citrix fas
the sso not working the users are being prompted to enter credentialswe check the certificate and no errors
no errors on the vda
no errors on the fas server
-
Hi,
I set a display language in Chrome
After logging off and logging in again, the language setting is not saved.
I have on Folder to mirror the folder:
AppData\Local\Google\Chrome\User Data\DefaultWhat am I missing for this to work?
-
Hi,
we have delay on citrix push notifications
Users send the push notification to the Citrix SSO app end the notification delayed about one minute -
Users are unable to launch Publish VDA using FAS, getting error “Username or password incorrect”.
On VDA Event Logs following Event are seen
Event ID 3:
Error Code: 0x3e KDC_ERR_CLIENT_NOT_TRUSTED
Extended Error: 0x800b0112 KLIN(0)Error Code: 0x19 KDC_ERR_PREAUTH_REQUIRED
However when running certutil doesn’t show any certificate exception
-
Hi
How admin can Remove an Employee's OTP?
-
Hi
when we create CS for exchange 2019 we got this error on search:
"we have trouble fetching results from the server"when we pass the netscaler the search is working good
-
I am using nfactor and i have the same issue after idel
22 hours ago, Carl Stalhood1709151912 said:Are you doing classic authentication policies instead of nFactor? Try nFactor and see if that helps.
-
Hi
after create waf profile and bind the policy to the CS
we get this messageHttp/1.1 Internal Server Error 43520
we disable the block from security check and from the signture
-
On 9/14/2022 at 4:30 PM, Johannes Norz said:
That's not possible, just the other way round: Restrict learning to specific IPs.
The only work-around I would know is, excluding this IP from the WAF expression
Greetings
Johannes Norz
CTA, CCI, CCE-AppDS
Hi
We want that the AppFW will block the source ip if they try to add some headers or try to attack
but if they do not try to change the url or try to add headers they will not blok -
How to bypass specific IP from Learning Mode but still block it
-
-
Hi,
We updated VPX to 13.0-87.9
After the upgrade, users are unable to download the RDP file from the GATEWAY.
An additional TAB will be opened for them with the error
http/1.1 object not foundWe performed a FAILOVER to the second NS which has not yet been upgraded and is in version 13.0-83.27 and the fault does not exist and users manage to download the RDP file and connect to their station.
**
The users receive the station through ATTRIBUTE from the AD
**
-
Problem with smart card and SSO
in Core ADC use cases
Posted
Hello
We have a problem with a smart card working with NETSCALER
For some reason it takes about half a minute to recognize the smart card from within the application or from the FULL DESKTOP
And another problem is with the SSO, where it also takes half a minute until the SSO is performed and sometimes not at all