Hello Team,

I am experiencing an issue with my Citrix NetScaler device when attempting to perform an SNMP query using the snmpwalk command. (I am using SNMP v3).

The snmpwalk command only returns 36 values, which seems to be a limited number of OIDs. I have verified the credentials and security configuration, and everything appears to be in order. 

Attached is a screenshot of the results obtained with the snmpwalk command.

Please, could you provide any documentation in order to read the correct OIDs for this device?

I would appreciate your assistance in resolving this issue and obtaining a complete list of available OIDs on the device.

 

Thank you in advance for your help.

 

Best regards,

Manuel Rodriguez

Hello,
I'm not an expert on that tool, but it seems that you are not using the correct MIBs.
It looks like you're using the generic SNMPv2-MIB standard RFC 3418 (1.3.6.1.2.1.1).

You will therefore need to use the correct MIBs depending on whether it's a NetScaler SDX (1.3.6.1.4.1.5951 SDX MIB)

Or if it's a NetScaler VPX (1.3.6.1.4.1.5951 NS MIB)

You can download the correct MIBs from the device's GUI (top "Download" tab). Remember that SDX MIBs and VPX MIBs are differen