NFactor Flow is displayed when Authentication Profiles is clicked in AAA Virtual Server

[lackty]

Hello Guys,

I am currently setting up native MFA on a Netscaler with the latest firmware and am using this guide: https://www.youtube.com/watch?v=vETvo0PeUNs
From minute 7:32 onwards, Authentication Profiles is clicked on in the guide and this appears, on my Netscaler the NFactor Flow appears instead of the profiles.
The Netscaler is running with an Enterprise license and the latest firmware 14.1 -29.63

[Michael Adam]

Hello @Tobias Block

 

this is caused the video use Version 12.1 and you 14.1. But it works like the same - take a look here:

You can bind the Authentication Policy without needing a nFactor Flow.

 

Regards,
Michael 

[lackty]

Hello @Michael Adam - ITCMA,

thank you for your answer but when i click on Authentication Policy i get this:

 

[Michael Adam]

Hello @Tobias Block

 

yes this is the new "Simplify nFactor configuration" release in 14.1 Build 29.63

It looks different but logic is the same and make configuration easier. You can use the old commands via CLI. Via GUI you can use it like described here - https://docs.netscaler.com/en-us/citrix-adc/current-release/aaa-tm/authentication-methods/multi-factor-nfactor-authentication/latest-nfactor-visualizer

 

Best regards,
Michael 

 

[Asyraf Mohd]

We just hit this problem last time while setup the SAML Authentication. Solution is adding the Authentication by using CLI adding line by line.