Jump to content
Welcome to our new Citrix community!
  • 0

Logging not display at Citrix Studio. How to restore this Logging?


poomz

Question

9 answers to this question

Recommended Posts

  • 0

Are you a Full administrator ? Could be an admin gave you only certain permissions 

Seems you also might have a MMC that has Studio and Storefront combined. Try to launch to Studio MMC and see. 
Also check the following  commands run ok in Powershell Get-Logsite or Get-LogDataStore . Perhaps during an upgrade the config logging was disabled https://support.citrix.com/article/CTX139447/how-to-disable-or-enable-configuration-logging-service-in-xendesktop-7-using-powershell

 

 

Link to comment
  • 0
3 hours ago, Robert Young1709152714 said:

Are you a Full administrator ? Could be an admin gave you only certain permissions 

Seems you also might have a MMC that has Studio and Storefront combined. Try to launch to Studio MMC and see. 
Also check the following  commands run ok in Powershell Get-Logsite or Get-LogDataStore . Perhaps during an upgrade the config logging was disabled https://support.citrix.com/article/CTX139447/how-to-disable-or-enable-configuration-logging-service-in-xendesktop-7-using-powershell

 

 

 

Yes.  I have administrator rights and use the default account when installing the Citrix system.  

OK. I will test to launch Studio by MMC.

Link to comment
  • 0
On 5/12/2023 at 7:20 PM, Robert Young1709152714 said:

Are you a Full administrator ? Could be an admin gave you only certain permissions 

Seems you also might have a MMC that has Studio and Storefront combined. Try to launch to Studio MMC and see. 
Also check the following  commands run ok in Powershell Get-Logsite or Get-LogDataStore . Perhaps during an upgrade the config logging was disabled https://support.citrix.com/article/CTX139447/how-to-disable-or-enable-configuration-logging-service-in-xendesktop-7-using-powershell

 

 

Hi Robert,

I have tested to run "Get-LogSite" and foun2.thumb.jpg.7266127ec5449cad524f9fcce8ea91d1.jpgd some problem about state as showed "NotSupported

How can I solved this issue?

 

Link to comment
  • 0

Correct: This means the license edition you have does not support configuration logging. Likely a standard edition license. https://www.citrix.com/content/dam/citrix/en_us/documents/data-sheet/cvad-service-feature-matrix.pdf

 

https://docs.citrix.com/en-us/citrix-virtual-apps-desktops/monitor/configuration-logging.html

"Product editions that do not support configuration logging do not have a Logging node in Studio."

Link to comment
  • 0
2 minutes ago, Robert Young1709152714 said:

Correct: This means the license edition you have does not support configuration logging. Likely a standard edition license. https://www.citrix.com/content/dam/citrix/en_us/documents/data-sheet/cvad-service-feature-matrix.pdf

 

https://docs.citrix.com/en-us/citrix-virtual-apps-desktops/monitor/configuration-logging.html

"Product editions that do not support configuration logging do not have a Logging node in Studio."

Can you suggest another method for checking the logging?  In case if we can't check  Logging node from Citrix studio

Link to comment
  • 0

Citrix Director would be the go to monitoring solution. https://docs.citrix.com/en-us/xenapp-and-xendesktop/7-15-ltsr/director.html 

It is available for all license editions. 

 

Configuration logging feature is more to track the changes that different admins make to CVAD site over time. e.g policies, catalog updates.

What are you looking to track ? 

The Citrix Health Assistant may also be a good tool if you are troubleshooting something that failed. 

 https://support.citrix.com/article/CTX207624/citrix-health-assistant-troubleshoot-vda-registration-and-session-launch

 

Link to comment
  • 0
1 minute ago, Robert Young1709152714 said:

Citrix Director would be the go to monitoring solution. https://docs.citrix.com/en-us/xenapp-and-xendesktop/7-15-ltsr/director.html 

It is available for all license editions. 

 

Configuration logging feature is more to track the changes that different admins make to CVAD site over time. e.g policies, catalog updates.

What are you looking to track ? 

The Citrix Health Assistant may also be a good tool if you are troubleshooting something that failed. 

 https://support.citrix.com/article/CTX207624/citrix-health-assistant-troubleshoot-vda-registration-and-session-launch

 

Yes.  I want to get tracking information about any citrix admins to change any functions at Citrix Studio. 

Link to comment
  • 0
10 minutes ago, poomz said:

Yes.  I want to get tracking information about any citrix admins to change any functions at Citrix Studio. 

 

Then Configuration logging is the correct feature for this. You could work with your Partner to look at updating your license edition or move to Citrix Cloud DAAS where configuration logging is enabled on all editions. 

Link to comment

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...