Jump to content
Welcome to our new Citrix community!

NetScaler MPX - HA -- Device configured with "STAYPRIMARY" but State is "Secondary" after activating HA


dirk kotte

Recommended Posts

Hi all,
we configured a new MPX with "STAYPRIMARY" and the other device  with "STAYSECONDARY".
But after activating HA from Node1-GUI both show Node1 & Node2 as "Secondary".

The Node2 was previously used for testing. All configurations should be lost/cleared.
What could be wrong? Some ideas?

THX Dirk

4cbf0cd6-09f5-4876-bdf4-2fa78d6e4da4.PNG

Link to comment
Share on other sites

2 hours ago, dirk kotte said:

Hi all,
we configured a new MPX with "STAYPRIMARY" and the other device  with "STAYSECONDARY".
But after activating HA from Node1-GUI both show Node1 & Node2 as "Secondary".

The Node2 was previously used for testing. All configurations should be lost/cleared.
What could be wrong? Some ideas?

THX Dirk

4cbf0cd6-09f5-4876-bdf4-2fa78d6e4da4.PNG

 

Did you enable the failsafe mode?

https://docs.citrix.com/en-us/citrix-adc/current-release/system/high-availability-introduction/configuring-fail-safe-high-availability.html

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...