As I stated in my previous post, there is no one Nirvana devicethat will fit everyone's tastes, so here's another twist on the topic. 

Impatica Showmate  is a device, call it a "puck", that you make a Bluetooth connection to from your smartphone using its Screen Projector software that you install on your smartphone.  A VGA cable is connected between the Showmate and the monitor you want to use.  You must register your mobile device with the Showmate.  Simply start the installed client on mobile device, enter in a few numbers from the bottom of the Showmate to register.  Then you just choose what registered Showmate device you want to connect to and hit select.  Your screen then pops up on the monitor the Showmate is connected to. 

 
Pic 1: Picture of the Showmate "puck", and VGA and USB power ports. 

Impatica was in the BlackBerry booth at CTIA showing their Showmate working with BlackBerry phones.  As part of the demo environment, they had the Rove Mobile Citrix Client on demo BB, and showed how they can remote the ICA presentation to an external monitor.  As you can see from the show pics below, they have some novel ideas about using this type of setup on portable LCD screens and such that you would find in police squad cars or utility trucks.  Great idea, especially when matched with the Rove Mobile Citrix Client to get access to all kinds of data from the secured data center. 

Pic 3: Michael Doyle, Impatica Director, Chairman and Chief Executive Officer showing the Impatica Showmate at CTIA 2008.

Pic 4: Showmate displaying a BlackBerry screen onto a portable LCD monitor inside a customer UI, mock of a law enforcement unit.  You can see the ICA session imbedded in the customer UI.

To stay consistent, I put the Impatica Showmate through the same hotel acid test I did with the other vendors.  I must note that the Windows Mobile Impatica ScreenProjector client that I'm using as I type this is still in Beta.  I used the Showmate with 2 devices, a Dell Axim X51v and an ATT 8525.  Latency on the X51v was very noticeable at times on the X51v, but response was good when using the 8525.  Note sure if this is related to old .vs. newer hardware/Bluetooth stacks, or the fact that the X51v has a larger resolution.  In general basic text entry like I'm doing now is pretty good.  Again, thanks to the Impatica team for getting us this beta to try.  I'm sure they still have some tuning tweaks up their sleeves before GA. 

The script is the same, in this case I'm using the Dell Axim X51v connected to the Showmate via Bluetooth to VGA out to the hotel's flat screen TV.  This picture below is an actual picture of the creation of the text for this blog using a XenApp connection to a published desktop, and running MS Word on that desktop over ICA.  This is where I stop and take the picture

Pic 5: Show mate connecting the Axim X51v running the ICA cleint to the hotel TV, and bluetooth mouse and keyboard.

The Showmate form factor is interesting in that you can see the device, or derivative of this device being imbedded in other devices to meet different goals, as shown in there show demo pciture above with a custom UI on the mountable LCD screen.  Imagine the use case of a utility working or law enforcement office having a mobile device that when in there car or truck is having applications and data delivered to them via XenApp or XenDesktop.  But once they exit their vehicle, they take the  mobile device with them and continue to have the same apps and data delivered to them, just on the native screen of the mobile device.  Whether it be a policeman on foot, or a utility working working on a transformer in the bucket of his boom truck.  A very interesting modular device approach IMO.  But at the same time, I can see road warriors carrying the Showmate with them to do presentations from their mobile phone, or use in the hotel as I am.  You can read more on their website, but they already have a lot of road warriors using their Showmate today.  They also have a product that compresses PowerPoint presentations, and then an optimized viewer to run the presentation from the mobile device.  You can get more details on this from their website.   

So does the Showmate pass the Hotel acid test?  Yes, I've been able to create this post using the Showmate, and my mobile device, and it does provide benefits described around a Nirvana Deviceuse case.  So it's definitely another option, with it's own twist on the Nirvana Device seach. 

Like this twist, tell us why or why not.  As always, we are looking for your input on defining the Nirvana Devicefor use with XenApp and XenDesktop.  

Day 2 of my search for the Nirvana Deviceat CTIA 2008 ended a few hours ago, and we have some cool products to talk about.  Let's see how they do when we replace my OQO Model 2 with Nirvana Device candidates from the show. 

This entry focuses on one of our newest Citrix Alliance partners, Celio Corp and their recent product launch of the Redfly Mobile Companion (http://celiocorp.com).

 
Pic 1: Celio Corp booth at CTIA, including Citrix collateral at the booth. 
 

Pic 2: Redfly demo at the booth connecting to XenApp 4.5. 

The Redfly is a definitely a device cut from the cloth of Chris Fleck's original Nirvana Devicepost.  The Redfly is a portable docking station for Windows Mobile devices, thus a Mobile Companion, and has a built in mouse, keyboard and monitor.  So you wanna run those BIG win32 apps from you WinMo device, but want a bigger screen, checkout the Redfly.  It doesn't have a CPU, memory or an OS.   You connect your WinMo device to the Redfly by either USB or Bluetooth.  If connected via USB, the battery in the Redfly will also charge your WinMo Device (8 hours of battery life), if it allow USB charging.  Once the Redfly software is installed on your WinMo device, it will detect when it is attached to the Redfly, change the effective screen resolution to 800x480 and enable the Redfly's mouse and keyboard transforming the user experience similar to that of a lot of UMPCs.

Pic 3: Redfly attached to an ATT Tilt in my hotel room at the Today screen. 

In this scenario, the ICA client is installed on the ATT Tilt, and all processing involved and required storage is provided by the Tilt.  Again, think of the Redfly as a docking station with a built in mouse, keyboard and monitor that you carry on trips as a companion. 

The 800x480 resolution of the Redfly easily enables me to connect to a virtualized Citrix desktop or published application, in this case a published Microsoft Server 2003 desktop with the Luna interface enabled.  As you can see from the picture below, this device has very good potential for use with  both published applications as well as XenDesktop connections when using a WinMo device.

Pic 4: Picture taken as I was working on the text for this entry.   

The Redfly has a number of other very useful features that really enhance its usability in my opinion.   
First off, there is a VGA out port on the back of the Redfly that enables you to output the screen to a larger monitor, overhead projector or hotel TV as shown in the picture below.  

Pic 5: Redfly using its VGA output to the hotel's flat screen TV. 

You'll notice that the entire screen of the TV is not used and that the 800x480 resolution is maintained even when output to a larger monitor.  Basically, you can use the Redfly as a VGA output device for you WinMo device if you like, very cool.  But I would like to see the Celio guys enable you to change the resolution being displayed when VGAing out to a larger monitor.  Well see what happens in subsequent releases. 

So you can use the Redfly's native screen or output to a larger screen, what about upping to a bigger keyboard and external mouse?  Well, they've thought of this as well.  There are also 2 USB ports on the back of the Redfly that you can plug in USB mice and keyboard.  Even cooler IMO is that I can plug a USB stick into this slot and the device will associate this new storage as "remote storage" on the WinMo device.  And you may have guessed it, ICA will now have access to this USB drive as part of its client drive mapping.  For those concerned about security of such a use case, you can always disable this virtual drive mapping from the XenApp admin console.

Pic 6: Shot of the USB Flash card reader files maped into the XenApp desktop session via virtual client drive mapping.  This is the actual flash card that contains the pics in this post plugged into the back of the Redfly with a USB flash card reader. 

There are a number of other cool features on the Redfly, such as special function keys that are mapped to normal phone functions like Send and End calls, but I'll
let you check out their site for these.  As I stated in my initial post on my blog, when I look at devices in this space, my first thoughts are how Citrix customers can leverage such technology to enhance their use of Citrix products.  So how to I rate this one, I like it.  I see it as a true enabling technology when used with mobile devices to access XenApp or XenDesktop.  IMO, the Redfly Mobile Companion enables a lot of the concepts that we discuss in the Nirvana Device concept.  While it's not a Nirvana smartphone, IMO it takes a lot of today's WinMo devices and gets them a lot closer to the Nirvana use paradigm.   Having the option to use the Redfly as a companion to provide a bigger screen with its mouse and keyboard, or use it as a VGA output device with an even larger external mouse and keyboard is an interesting advantage if this is what you are looking for. 

Reality check: note that this entire post was produced using the ATT Tilt phone, 3G WWAN network, from the Redfly's mouse, keyboard and native monitor connected to a XenApp published desktop.  And it worked really well!  Albiet, I'm used to using UMPC devices with smaller screens and keyboards, it will take some getting used to for some.  So if you looking to lighten your load when traveling, and would like an ICA companion to go with you mobile phone so you can leave your laptop behind, you might want to check out the Redfly from Celio Corp. 

We'd appreciate your thoughts on the use of these types of devices with XenApp and soon XenDesktop.  I'm sure the Celio guys will also be interested in your input, pro or con.  At the end of the day, there is no one Nirvana solution for everyone, but is the Redfly going down the right path for Citrix users looking to further leverage ICA on mobile devices?    

Our search for the Nirvana Device has led me to Las Vegas and CTIA 2008.  Citrix has been working with a number of partners around the concept of the Nirvana Device, and a lot of them are here this week.  The plan is to try and get as many demo devices that I can and report my findings in my blog as related to their use from my hotel room at the show.  So let's start off with my current baseline config of my remote office in my hotel room in Vegas. 

Device: OQO, maker of the Model 2 UMPC (www.oqo.com), and a Citrix Alliance partner.  You may have seen them at iForum or Citrix Summit over the last year.

I've actually been using OQO Model 2 as my primary device over a year now, and UMPCs such as the Model 2 used with Citrix App Delivery work great.  In the FTL office, I dock the Model 2 and the doc has 2 VGA outputs, so I run a dual monitor setup and drive a 21" and 19" monitor from my desk.  I also have a doc at home connected to my home office monitor via a KVM switch.  So when working from home, I simply KVM from my home PC and use the same device that I use from work.   At the CTIA show, I'm docked and connected to the Philips flatscreen TV in my hotel room.  Of course, the form factor of the Model 2 is also great when attending meetings at the office, or working from home on the couch (note: I'm over 40 and have no problem seeing text on the OQO's native screen, but some will have issues clearly seeing text on a device this small, reading glasses may be required by some J).  The Model 2 I have has built in EVDO Rev A from Verizon, which works great when on the road or at home (using it from my hotel room as I type this entry).  I can see this type of devices being used by others like myself that just prefer a small form factor UMPC, as well as some good tactical usages with Citrix customers, where a standard sized laptop is just to big.  Some pics of the baseline remote office setup below:

 
 
As you can see, several of the Nirvana Device concepts that Chris Fleck mentioned in his original post (Original Nirvana Device Post) are already in play.  Being the Model 2 is a UMPC and not a smart phone, I'm cheating a little, but:
-          I am docked and using the hotel's flat screen TV as a larger monitor

-          I am using an external Bluetooth mouse and keyboard

-          I am using a WWAN connection for my network

-          I am using Citrix App Delivery to do my work

While I don't plan on giving up my OQO any time soon, I am going to see what I can find at the show that I could use in the same basic configuration that I'm using the OQO in.

Off to my 2^nd meeting of the day, and hopefully will return tonight with some more Nirvana Device candidates to try out.